-
EP10 Not Go Gauge for Caps 7006-28-7.
According to standard ...
-
EP10 Go Gauge for Caps on Finished Lamps 7006-37-1.
Accordin...
-
EY10 Go Gauge for Caps 7006-7-1.
According to standard IEC 60...
-
E17 Go Gauge for Lampholders 7006-25H-1.
According to stand...
-
E17 Not Gauge for Lampholders 7006-26C-1.
According to sta...
-
IEC 60238 Figure 5 Torque Test Caps of E40.
According to st...
-
one set with 5 pcs, the diameter is: 110 mm, 145mm, 180mm, 220...
-
GX53 Lamp Cap Gauge According to IEC60061....
-
one set with 8 pcs, the diameter is: 120 mm, 150mm, 180mm, 210...
-
UL 499 Figure SB4.1 IEC Test Pin.
According to standard UL...
-
IEC 60238 Figure 14 + Table 9 Test Cap for Lampholders E27.
...
-
E40 Lamp Cap Gauge According to IEC60061....
> Products
Eason Wang